These AI-generated images are illustrative, not photographs or renderings of the 228 4th Avenue property.
An “age-eligible” label is not an approval, a finding that a house is historic, or a signal that a proposed addition is barred. It is a prompt to establish the property’s status and understand what review may apply before committing to a design.
SF YIMBY reported on November 15, 2026, that permits have been filed for a minor expansion at 228 4th Avenue in the Inner Richmond, proposing one added floor and one dwelling while retaining the existing street facade. The report describes a three-story building of about 3,860 square feet with two-bedroom units. It lists a Las Vegas-based individual filing through 228 4th Avenue LLC, plans by Walnut Creek-based S&P Professional Engineers, and an application construction estimate of about $100,000 that is not described as inclusive of all development costs. It also reports the pre-1906 wood-frame house is listed as age-eligible but not deemed a historic resource. Filing is not approval; no construction timeline was reported. 1
San Francisco Planning explains that buildings over 50 years old with architectural or historical significance may be considered potential historic resources, and proposed changes may require environmental review. The phrase “age-eligible,” by itself, does not resolve whether a particular property meets that standard or what review a project will receive. 2
A one-floor addition can raise a significant review question
A vertical addition can change a building’s visible profile and relationship to its street, even when the scope sounds modest. That makes it important to separate the size of a project from the questions the city must answer about a property and a proposed change.
The practical point is not that every one-floor addition triggers the same review, or that a pre-1906 house will be treated as a historic resource. The point is that owners should clarify status and review requirements early, before detailed design work assumes those questions have been settled.
The city says a vertical or horizontal addition to any building, regardless of historic status, must conform to San Francisco’s Residential Design Guidelines. If a building is a known historic resource, additional standards and, where applicable, Planning Code Article 10 requirements also apply. The department generally considers an addition in conformance when it does not alter, change, obscure, damage, or destroy a historic resource’s character-defining features. 2
What “age-eligible” means, and what it does not
The 50-year threshold is a starting point, not an automatic historic designation. San Francisco Planning says buildings constructed over 50 years ago that possess architectural or historical significance may be potential historic resources under the California Environmental Quality Act, or CEQA. Proposed changes to such buildings may require environmental review. 2
The city also cautions that the vast majority of San Francisco buildings have not been surveyed, documented, or listed as historic resources. A building’s absence from a list therefore does not establish that it is not historic. Nor does an age-eligible status code, on its own, settle the CEQA question. 2
For historical resources, the city describes CEQA review as a two-step process. First, the city determines whether the property is a historical resource. Second, it determines whether the proposed changes would cause a substantial adverse change in that resource’s significance. This is a project-specific evaluation, not a conclusion that can be drawn from age alone. 2
For an owner, architect, or contractor, the useful distinction is between a recorded status and the review conclusion for a particular proposal. An online map entry can help you begin the inquiry. It should not be treated as a final answer about a project’s environmental review or design.
Which changes can draw attention
San Francisco Planning identifies demolition, complete alteration of a front facade, and a substantial vertical addition visible from public rights-of-way as examples of changes that may be relevant to the CEQA analysis of a historical resource. 2

Those examples point to a practical design question: what will change, and how will that change relate to features that contribute to a resource’s significance? Where an addition sits in relation to public views may matter. Retaining a street-facing facade can be a design strategy, but it is not itself a city finding that a project will qualify for a particular review outcome.
A team can make that question easier to evaluate by documenting existing conditions and proposed changes clearly. At an early stage, that may mean distinguishing what is retained, altered, removed, or added, and making the addition’s relationship to visible building features understandable in drawings. The city’s technical review, rather than the project description alone, determines the applicable conclusions.
Three outcomes, different review paths
San Francisco Planning lists three possible outcomes for CEQA review of proposed changes to historic properties:
- Categorical Exemption: The city says this may apply when a change is minor and meets the Secretary of the Interior’s Standards and Guidelines for the Treatment of Historic Properties.
- Negative Declaration or Mitigated Negative Declaration: These may apply when a project is not minor but would not cause a substantial adverse change, or when an adverse change can be mitigated by following those standards.
- Environmental Impact Report: The city says an EIR is required when a project would potentially cause a substantial adverse change in the significance of a historical resource. 2
These are not interchangeable labels, and an applicant cannot choose one simply because it seems preferable. The outcome depends on the city’s findings about the property, the proposed changes, and any applicable standards or mitigation. The three paths can involve different review needs, so owners should avoid building a schedule around an assumed outcome before the city has evaluated the proposal.
For early planning, treat CEQA review as a scope and sequencing issue. Ask what information the city needs to determine historic status, and what the project team should resolve before advancing a design. Do not mistake a preliminary status description or a filed application for a final determination.
Raising a house is a separate question
Some owners consider raising a building for seismic retrofitting or foundation work while planning an addition. San Francisco Planning’s FAQ says buildings that must be raised for seismic retrofit or foundation installation will be approved. It also cautions that raising buildings designated as historic resources may not be considered appropriate, with proposals reviewed case by case. 2
That guidance concerns a distinct scope question. It should not be read as a determination about any specific building, a guarantee of every permit, or an answer about a proposed added floor. If an owner is considering both raising and expanding a house, identify both scopes early and discuss how they relate before the design and application process advances.
What to do before the first detailed drawing
Start with the property record. San Francisco Planning directs owners to the SF Property Information Map to review a building’s historic status and related status codes. Use it as a first check, then ask the department to clarify what the information means for your proposed work. 2
The department makes Historic Preservation Technical Specialists available at its Public Information Counter and strongly urges applicants to consult a specialist early in design to identify potential limitations. If historic-resource review applies, ask whether a Historic Resource Review application is relevant and what supporting information is needed. The city identifies Preservation Bulletin No. 16, “CEQA and Historical Resources,” as a resource for this process. 2 3
At the same time, check the proposed addition against the Residential Design Guidelines. The city says additions to known historic resources must also meet the Secretary of the Interior’s Standards and any applicable Article 10 requirements. For project administration, keep the agency roles clear: the Department of Building Inspection issues permits, while Planning reviews for Planning Code compliance. 2

A practical first-pass checklist is straightforward:
- Look up the property and record the status codes shown.
- Ask Planning what status and review steps apply to the specific proposal.
- Identify facade, character-defining, and public-view questions the design team should address.
- Confirm whether a Historic Resource Review application or additional documentation is appropriate.
- Coordinate the Planning review questions with the building-permit process before fixing the design scope.
These steps do not predict approval. They help the owner learn what needs to be resolved before paying to develop a design around unconfirmed assumptions.
The next decision is about sequence
Before committing to a massing or paying for detailed drawings, get the property’s recorded historic status and ask the city how it relates to the proposed scope. Then have the design team test the addition against the applicable guidelines and review process. That sequence can help owners and project teams identify questions early, when the design is still being shaped.
For owners planning a residential addition, Atlas Premier Services & Consultants provides information about its residential construction services and broader construction services. This article discusses publicly available project information and does not represent participation in or a commitment to the project by Atlas Premier Services & Consultants. The planning points are general considerations, not claims about the project's performance or condition.
Ready to move your project from concept to completion?
Contact Atlas Premier Services and Consultants today.
Atlas Premier Services and Consultants
Strategic Solutions. Trusted Execution.
Lake Merritt Plaza
1999 Harrison Street, 18th Floor
Oakland, CA 94612
Phone: (888) 999-8417
Email: admin@atlas-premier.com
Website: www.atlas-premier.com
Sources
- Andrew Nelson, “Minor Expansion For 228 4th Avenue in Inner Richmond, San Francisco,” San Francisco YIMBY, November 15, 2026. https://sfyimby.com/2026/11/minor-expansion-for-228-4th-avenue-in-inner-richmond-san-francisco.html. Accessed November 15, 2026.
- San Francisco Planning Department, “Historic Preservation FAQs,” last updated January 19, 2026. https://sfplanning.org/historic-preservation-faqs. Accessed November 15, 2026.
- San Francisco Planning Department, “Preservation Bulletins,” publisher resource page, last updated December 7, 2023. https://sfplanning.org/resource/preservation-bulletins. Accessed November 15, 2026.
Disclaimer: This content is for general informational purposes only and does not constitute legal, financial, engineering, construction, regulatory, or other professional advice. Reading this content does not create a client or contractual relationship with Atlas Premier Services & Consultants. Because every project and property is different, consult qualified professionals regarding your specific circumstances. Atlas Premier Services & Consultants makes no warranties regarding the accuracy or completeness of this information and is not responsible for third-party content or references. Testimonials, examples, and case studies are illustrative only and do not guarantee similar results.